MODEL SPECIFICATION

If you have questions on the BEKO METPOINT® PRO Device or would like to order over the phone, contact our customer service toll-free: 866-650-1937.

METPOINT PRO Stationary X2
Adaptable and configurable to user specific needs

Includes:
• DP109 PDP sensor
• FS109 Maximum flow sensor
• DD109 external, expandable, multi-function display,
wall mountable and pre-configured with two digital sensor inputs
• 90 to 260 VAC power supply
• USB interface
• Integrated data logger (shown in optional X4 configuration with two additional analog sensor inputs for even greater control)

HIGH MEASUREMENT ACCURACY
The polymer sensor ensures the most accurate reading of system dew points

DURABILITY AND RELIABILITY
The materials used are non-corrodible and dirt repellent

SPECIFICALLY FOR COMPRESSED AIR
Precise and accurate measurement with quick, responsive display of measured values

MODULAR SYSTEM
Fully expandable with up to six sensors per station and up to 256 displays via bus system

SUITABLE FOR VARIOUS APPLICATIONS
Portable and stationary versions offer users maximum flexibility

MULTI-FUNCTION DISPLAY

• Wall Mount Dimensions (in): 4.65 x 4.53 x 3.66
• Cabinet Mount Dimensions (in): 3.62 x 3.62
• Housing Protection: IP65
• Operating Temperature: +32 to +122 °F
• Transport Temperature: -4 to +158 °F
• Sensor Inputs: Available with 2 (X2), 4 (X4), or 6 (X6) sensor inputs (2 digital with up to 4 additional analog inputs)
• Interface: USB
• Keypad: 4 keys
• Power Supply: 100 . . . 240 VAC / 50-60 Hz / 10 VA
• Display: Graphic Display, 160 x 100 pixels
• Alarm Output: 2 relays, 230 VAC, 3 A, volt-free, change over contact
• Analog Output: Connection of 4 to 20 mA signals of dew point and consumption sensors (max. burden < 500 Ohm)
• Integrated Data Logger: up to 1,000,000 values recording intervals: min. 1 sec. / max. 59 min. 59 sec.

AVAILABLE SENSORS FOR METPOINT PRO

(FOR X2, X4, OR X6 MODELS)

Consumption Sensors

• Maximum Version 185.0 m/s, 220 mm probe length (standard equipment)
• High Speed Version 224.0 m/s
• Sensor Length: 120 mm
• Sensor Length: 160 mm
• Sensor Length: 300 mm
• Sensor Length: 400 mm

Dew Point Sensors

• Dew Point: -112 °F to +68 °F
• Dew Point: -4 °F to +122 °F

Pressure Sensors

• Precision Model 0 to 232 psig (± 0.5% accuracy of full scale)
• Precision Model 0 to 580 psig (± 0.5% accuracy of full scale)
• Standard Model 0 to 232 psig (± 1.0% accuracy of full scale)
• Standard Model 0 to 580 psig (± 1.0% accuracy of full scale)

Temperature Sensors

• Screw-in Temperature Probe Pt 100, Class A, length 300 mm, Ø 6 mm with measuring transducer
• Indoor / Outdoor Temperature Probe Pt 100, Class A
• Indoor / Outdoor Temperature Probe Pt 100, Class A with measuring transducer

Ampmeter Sensors

• Clamp-on Ampmeter 0…500 A AC including 15 ft. cable

The METPOINT® PRO comes standard with advanced analog and electronic outputs that offer users complete control over their system.

In addition to the variety of sensor arrays that can be attached to the METPOINT® PRO, there are several accessories available providing distinct technological advantages.

Beyond simple lights and buzzers, the METPOINT® PRO series allow users full diagnostic control over all active sensors via your PC whether on or off-site.

OPTIONAL RS 485 PORT

By the addition of the optional RS 485 port to the METPOINT® PRO S up to 256 stations arebconnectable, and up to 32 units can be displayed simultaneously on the PC for complete evaluation via the BEKO Software. You can now have a total care package at your fingertips for the entire plant for all relevant compressed air or gas parameters in use.

Furthermore, each METPOINT® PRO S is available with an optional ethernet interface, bringing each METPOINT PRO S unit “online.”

The METPOINT PRO series far surpasses typical compressed air monitoring tools by providing true 21st century solutions that are future-proof, and expandable to suit ever changing plant requirements. With a low cost initial investment, you have ensured exponential long-term savings that could never be recouped otherwise – only with the METPOINT® PRO series.