INTEGRATED DISPLAY AND 1″ NPT PIPE MOUNTING SECTION FOR 0.3 TO 170 SCFM

BEKO METPOINT FLM devices can be simply and quickly installed – even under pressure conditions. With its variety of interfaces it is easy to integrate into existing process control system.

FLM Stationary S

Includes:
Measuring section with integrated digital display
indicating actual flow and total consumption
Built-in flow sensor

METPOINT® FLM STATIONARY DEVICE

Integrated Measuring Section: Measuring range scfm
1/2″: 0.1 to 50
3/4″: 0.2 to 100
1″: 0.3 to 170
1-1/2″: 0.6 to 320
2″: 1.2 to 530

Sensor Type: 2 x silicium cup

Operating Temperature: -22 to 176 °F

Operating Pressure: up to 232 psig

Analog Output: 4 to 20 mA

Digital Output: USB Connection via SID Interface

Display Type: Integrated, Single Value Display

Measuring Principle: Thermal Mass

METPOINT® FLM X2 STATIONARY DEVICE

Integrated Measuring Section: Designed for direct pipe mounting, without the integrated measuring section

Usable from ½” up to 12″ pipe sections

Standard unit is capable of measuring from 0.12 to 23,275 scfm

Sensor Type: 2 x silicium cup

Operating Temperature: -22 to +176 °F (housing) / -22 to +230 °F (probe)

Operating Pressure: up to 580 psig

Analog Output: 4 to 20 mA

Digital Output: USB Connection via SID Interface

Display Type: External, Multiple Value Display

Measuring Principle: Thermal Mass

HIGH MEASUREMENT ACCURACY
± 3% v.M. through thermal mass stainless sensor designed specifically for compressed air

INDEPENDENT RELIABILITY
Reliable measurement that is independent of temperature and pressure

EASY TO USE DISPLAY
Multi-function display is simple to use, easy to read, and offers expansion ports for additional sensors

LEAKAGE & CONSUMPTION MEASURING
Low range measurements are possible for recording leakage and consumption data

SUITABLE FOR VARIOUS APPLICATIONS
Portable and stationary versions offer users maximum flexibility

TYPICAL FIELDS OF APPLICATION

• Pharmaceutical industry
• Petrochemical industry
• Plastics industry
• Production plants
• Automotive industry
• Semi-conductor industry
• Power stations
• Metal working industry

For use with all types of compressed air or gas stream applications.
Using optional software, the default values of our stationary models can be adjusted to the parameters desired by the customer.

FUNCTION
Dual sensors are employed, one with a constant temperature difference, while the second detects the gas temperature in realtime. As the flow rate increases, more heat is removed and more power is required to keep the temperature of sensor one constant. The power required at sensor one and the temperature increase at sensor two are transferred into the corresponding flow rate.