BEKO DRYPOINT® M PLUS Membrane Dryer
INLET FLOW 1.83 – 116 SCFM / INLET DEW POINT +40°F – +100°F
· Integrated pre-filtration inside the membrane housing
· Hassle free installation
· Complete protection of your investment
· Super-fast element change means ultra-low maintenance
· Peak efficiency using Twist 60 technology
Dimensions & Specifications
Search below based on your specific
needs and click on a model to see pricing, order, or more
information.
Models | InletFlow | OutletFlow | A*(in) | B*(in) | C*(in) | D*(in) | NNPT Conn | Weight*(lbs) | Pre-Filter | WallMount | ||||
DM 08-19KA-N | 1.83 | 1.65 | 10.43 | 1.81 | 1.06 | ø 1.77 | 1/4″ | 1.74 | included | not-included | ||||
DM 08-24KA-N | 3.66 | 3.31 | 12.40 | 1.81 | 1.06 | ø 1.77 | 1/4″ | 1.92 | included | not-included | ||||
DM 08-28KA-N | 5.49 | 4.97 | 13.98 | 1.81 | 1.06 | ø 1.77 | 1/4″ | 2.07 | included | not-included | ||||
DM 08-34KA-N | 7.32 | 6.78 | 16.34 | 1.81 | 1.06 | ø 1.77 | 1/4″ | 2.27 | included | not-included | ||||
DM 10-34 CA-N | 10.45 | 9.39 | 13.34 (17.00) | 2.95 | 1.10 | - | 3/8″ | 4.08 (4.13) | included | included | ||||
DM 10-41 CA-N | 11.00 | 9.95 | 16.10 (19.76) | 2.95 | 1.10 | - | 3/8″ | 4.58 (4.63) | included | included | ||||
DM 10-47 CA-N | 14.60 | 13.20 | 18.46 (22.19) | 2.95 | 1.10 | - | 3/8″ | 4.97 (5.07) | included | included | ||||
DM 20-48 CA-N | 22.00 | 19.90 | 18.98 (22.57) | 3.94 | 1.34 | - | 3/4″ | 7.66 (7.72) | included | included | ||||
DM 20-53 CA-N | 29.30 | 26.50 | 20.95 (24.59) | 3.94 | 1.34 | - | 3/4″ | 8.38 (8.38) | included | included | ||||
DM 20-60 CA-N | 38.30 | 34.10 | 23.70 (27.35) | 3.94 | 1.34 | - | 3/4″ | 8.99 (9.04) | included | included | ||||
DM 20-67 CA-N | 49.30 | 44.00 | 26.46 (29.98) | 3.94 | 1.34 | - | 3/4″ | 9.64 (9.75) | included | included | ||||
DM 40-61 CA-N | 58.10 | 53.40 | 23.20 (31.30) | 5.74 | 1.89 | - | 1-1/2″ | 17.14 (20.00) | included | included | ||||
DM 40-75 CA-N | 89.50 | 80.10 | 28.30 (36.80) | 5.74 | 1.89 | - | 1-1/2″ | 19.56 (22.44) | included | included | ||||
DM 40-90 CA-N | 116.00 | 103.00 | 34.60 (42.75) | 5.74 | 1.89 | - | 1-1/2″ | 22.00 (24.86) | included | included |
* () dimensions & weight include wall-bracket in unit.
Filtration and drying in a single unitPERFECT SET-UP
Filtration immediately before the membraneTWIST 60 TECHNOLOGY
Peak efficiencyEASY AND SIMPLE
Fast element replacement, low maintenanceBUILT-IN
Integral surge diverter
What is Twist 60?
Twist 60 represents the unique arrangement of membrane fibers when winding: the fibers build up in layers around the center tube of the membrane element, each layer crossing the one before.
What is the advantage?
The lowest purge consumption, which means low energy costs: The purge air is distributed effectively in the whole membrane element, thus using the maximum available contact surface. This results in a highly efficient drying process.
Low space requirements:
The principle of Twist 60 reduces the total height of the membrane element, thus resulting in a smaller dryer.
1 Compressed air runs through the core pipe, and is then diverted to the membrane element in the housing. The compressed air, which is still humid, flows through the highly selective hollow fiber membranes of the membrane element inside.
2 The purge air, which is required for drying, diverges continuously at the outlet area of the membrane element, and expands to atmosphere using a fixed nozzle orifice. Due to this expansion, the purge air becomes very, very dry as the water vapor now fills an expanded volume. The dry purge air flows over and around the exterior of the membrane fibers.
3 As a result, air flows in one direction outside the membrane, separated only by the membrane wall. Humid compressed air flows inside the membrane as dry purge air passes outside. Due to the difference in moisture content in the passing airstreams, moisture from the compressed air is drawn into the purge air. The use of Twist 60 technology ensures maximum drying efficiency.
4 Dried compressed air leaving the membrane element.
5 Saturated purge air is released back to atmosphere.

Download more information about the BEKO DRYPOINT® M & M PLUS series here.
INSTALLATION ACCESSORIES
Wall Mount Bracket for DRYPOINT® M Membrane Dryers
BEKO Wall Mount for DM08KA (-N) Model Sizes
BEKO Wall Mount for DM10CA (-N) Model Sizes
BEKO Wall Mount for DM20CA (-N) Model Sizes
BEKO Wall Mount for DM40CA (-N) Model Sizes
ANNUAL REPLACEMENT ITEMS
Annual Maintenance Kit for DRYPOINT® M Membrane Dryers
Including Replacement Filter and Float Drain
BEKO Maintenance Kit for DM08KA (-N) Model Sizes
BEKO Maintenance Kit for DM10/20CA (-N) Model Sizes
BEKO Maintenance Kit for DM40CA (-N) Model Sizes